单页简介

        轻工塑机(苏州)有限公司

        厂址:江苏省苏州市吴中区东吴工业园兴吴路67号

        电话:0512-68226118 68204423

        传真:0512-65134034

        邮箱:uuzb@163.com

        产品详细

        116

        产品名称: SWP系列强力塑料粉碎机

        发布日期: 2015/9/30 14:08:06

        点击数: 5 

        二维码:

        简述:

        产品详情

        产品介绍
        Product Introduction 
        SWP系列强力塑料粉碎机主要用于聚苯乙烯,改性聚苯乙烯(ABS),聚丙烯(PP),聚碳酸脂(防弹胶),聚氨乙烯(PVC),聚氨脂( PU),尼龙(NYLON),橡胶和各种废旧塑胶制品的粉碎,如更换相应的筛孔板,并调整刀片间隙,还可破碎各种吹塑模、压延模、薄片、薄板等塑料废品。其他在日用品,玩具,电器零件,建材等行业也有广泛用途。
        SWP series strong plastic crusher is mainly used for the crushing of polystyrene, modified polystyrene (ABS), polypropylene (PP), polycarbonate (bulletproof plastic), polyurethane vinyl (PVC), polyurethane (PU), nylon (NYLON), rubber and various waste plastic products. For example, replace the corresponding sieve plat, adjust the blade gap, and also crush all kinds of blow mold, pressing mold, flake, sheet metal and other plastic wastes. Others are also widely used in daily necessities, toys, electrical parts, building materials, etc. 
        工作原理
        Operating Principle
        ◆外形美观大方、配色协调,漆膜牢固;
        ◆Appearance is beautiful and elegant, color is coordinated and film is firm; 
        ◆入料斗、破碎室、筛斗分离设计,装卸容易;
        ◆Inlet hopper, crushing room and screening bucket separation design, and easy to load and unload; 
        ◆可换式爪刀设计,剪断力强;
        ◆Interchangeable-type claw knife design with strong cutting force; 
        ◆破碎室特殊设计,不跳料,进料口大,易于投料;
        ◆Special design for crushing room, no material skip, large feed inlet and easy to charge; 
        ◆破碎室前后壁采用双层隔音,噪声低;
        ◆The front and back walls of crushing room use double-layer sound-proof with low noise; 
        ◆设有清洗保险装置,安全可靠。
        ◆Cleaning safety device is equipped to be safe and reliable. 
        主要技术参数

        Main Technical Parameters 



        上一个: BL卧式拌料机

        下一个: CZ称重计量机

        版权所有:江苏苏州吴中区东吴工业园兴吴路67号   技术支持:轻工塑机 

        钱柜平台登录_钱柜官网-钱柜官网登录