单页简介

        轻工塑机(苏州)有限公司

        厂址:江苏省苏州市吴中区东吴工业园兴吴路67号

        电话:0512-68226118 68204423

        传真:0512-65134034

        邮箱:uuzb@163.com

        产品详细

        116

        产品名称: MH100高速印字机

        发布日期: 2015/9/30 14:22:08

        点击数: 3 

        二维码:

        简述:

        产品详情

        产品介绍
        ◆  Product Introduction 
        本厂生产的高速印字机MH100是被动牵引式油墨印字机,主要用于电线、电缆、PVC软硬管、PU管、尼龙管、热缩管及其他配合挤出机之挤出材料的表面印刷。
        High-speed printer MH100 produced by our factory is passive traction type of printing ink printer, mainly used for the surface printing of wires, cables, PVC soft and hard pipes, PU tube, nylon tube, heat-shrink tube and other extruded materials of other supporting extruder. 
        ◆  工作原理
        ◆  Operating Principle 
        利用挤出材料与印字轮之间的摩擦力,带印字轮转动,使印字轮表面的带有油墨的印字内容在被印物上。
        The use of the friction between extruded materials and printing wheel, with the rotation of printing wheel makes the printing content with printing ink on printing wheel surface on the printed object. 
        ◆  主要技术参数:
        ◆  Main Technical Parameters
        本机工作高度:           850mm----1150mm
        Working Height of the Machine: 850mm----1150mm
        适用印字轮外径:         Ф86mm-Ф100mm
        Outer Diameter of Applicable Printing Wheel: Ф86mm-Ф100mm
        适用印刷范围:           Ф0.7mm-----Ф50mm
        Applicable Printing Scope:   Ф0.7mm-----Ф50mm
        印字机轴径:             Ф20mm
        Printer Shaft Diameter:  Ф20mm
        印字速度:               ≤150m/min
        Printing Speed:          ≤150m/min  
        压轮上下调节距离:       40mm/80mm
        Upper and Lower Adjustment Distance of Clamping Roller: 40mm/80mm
        压轮前后调节距离:        50mm
        Front and Rear Adjustment Distance of Clamping Roller: 50mm
        导向轮上下调节距离:      80mm
        Upper and Lower Adjustment Distance of Guide Wheel: 80mm
        导向轮前后调节距离:      50mm
        Front and Rear Adjustment Distance of Guide Wheel: 50mm


        版权所有:江苏苏州吴中区东吴工业园兴吴路67号   技术支持:轻工塑机 

        钱柜平台登录_钱柜官网-钱柜官网登录